As you drive along the surface streets and highways in and around the Fort Myers, FL, area, you may hear an occasional "tink" against one of the surfaces of your vehicle. It could be a tiny pebble that was kicked up as another car went speeding over it, or it could be some other trash or debris that you ran over. Whatever the case may be, that "tink" could mean that your vehicle's paint now has a tiny chip. While you may not notice one minor chip, you will likely have many more tiny chips as time goes by and you drive more and more.
Automotive paint finishes tend to be susceptible to scratches and dings caused by those small pebbles in Fort Myers, FL. Those tiny stone chips can turn into much more significant issues with the vehicle's exterior throughout the car's life. The best way to protect your vehicle's paint and ensure it remains in its most pristine condition is by installing paint protection film, which can add outstanding surface durability and a scratch-resistant high gloss to your factory or custom paint finish.
At Naples Auto Armour in Naples, FL, our trained and certified technicians understand how light defects stain your car's exterior paint, and we bring you only the highest quality protection films to prevent everyday road damage. We offer four different paint protection film packages for you to choose from, depending on your needs, and we can also customize the paint protection film coverage if necessary.
Paint protection film, sometimes called a "clear bra," is a self-healing, thermoplastic urethane film applied to the vehicle's painted surfaces to protect it from the harsh conditions present on the roads in Fort Myers, FL. One of the main reasons that paint protection film has become more necessary in the modern day is that vehicle manufacturers have been using more environmentally friendly water-based paints approved by the Environmental Protection Agency (EPA).
These newer paint systems are far more susceptible to paint chips and can be easily scratched. The paint protection film is there to counteract this natural susceptibility and keep your vehicle's finish looking great.
When you entrust your vehicle's exterior to Naples Auto Armour in Fort Myers, FL, you can rest assured that the paint protection film will be installed properly to ensure that the car is no longer susceptible to rock chips. Our top installers of paint protection films realize the importance of the paint and work diligently to ensure that the virtually invisible film can extend the life of the car's paint for many years.
There are many great benefits to protection films for your car's exterior paint finish. With the automotive film we install at Naples Auto Armour in Fort Myers, FL, here are some of the advantages that you will receive:
For all of these reasons, it makes sense to protect your car's paint for far longer than you may expect.
Applying the paint protection film is an intricate process that takes training and experience to do properly. At Naples Auto Armour, our Fort Myers, FL, team has extensive experience and a clear process for completing the job effectively and efficiently. We use the following steps to get it done right:
When you need paint protection film (even matte options match factory and custom paint finishes) that is installed properly, the only name in Fort Myers, FL, to rely on is Naples Auto Armour.
Paint protection film installation needs to be done by experts. Choose any of our four packages today and let us help protect your car for years.
Below are the packages, the surfaces we will work on, and the price of each one.
The partial front-end package is designed for affordability. However, it comes at the price of limitation.
This service includes:
The full front-end package gives the entire front end of your car a protective covering against blemishes while on the road or in parking lots.
This service includes:
The drivers package is one many clients go for. It covers almost the entire car but leaves a few parts vulnerable.
This service includes:
The full body package is the one we advise every client to go for. If you intend to keep your entire vehicle clean and clear for years no matter what road you drive on, you should buy this last package. It is designed for the roughest and toughest terrains possible.
AREAS COVERED IN PAINT PROTECTION FILM:
Applying a protective clear bra to automotive vehicles is one of our top services and we put our heart and soul into delivering an excellent finish.
We start by preparing the car for its new look by thoroughly washing off any dirt from the surface and decontaminating it.
A paint correction job is necessary to prevent scratches from appearing under the invisible XPEL film.
After the paint correction job, we wash the entire vehicle again for a complete neutral paint surface to work with.
At this point, we need to begin the installation of XPEL generously and strategically to ensure that the entire surface of the car is covered and protected.
We finish off the process by reassembling all the previously detached parts after curing. Every panel is meticulously stretched and trimmed for a true custom installation. Our goal is to make your paint protection film installation virtually undetectable.
We at Naples Auto Armour stand behind our craftsmanship. This includes any bubbling, peeling, lifting, and particulate (within reason) that may tarnish film installation quality due to our installation negligence. Film compromise due to installation negligence will generally show itself within 90 days after application. Our approach to Paint Protection Film is to wrap and tuck as many edges as the film and vehicle intricacy allows.
Sometimes we get carried away and push farther than the capabilities of the film and what is durable for the long term. If this happens it is not the end of the world, a quick trip to the shop to trim a few millimetres back is all this is required. You will even get a free wash out of it! Customer satisfaction is our number one priority; we will do what is necessary to make it right.
Our relationship does not end when your vehicle leaves our studio, you will be properly educated and equipped with the necessary products to maintain your vehicle the right way. You will drive a new car every day.
Over the years, computer-cut patterns have become more popular with installation shops due to ease of installation, film waste, and efficiency. However, computer-cut patterns do have limitations when your goal is to wrap and tuck as many edges as possible. For this reason, we employ a combination of modified computer-cut patterns and bulk installation techniques to achieve the finish we desire. Bulk installation is the process of taking a bulk sheet of material and manually stretching and trimming for a true custom installation, this is especially beneficial on hoods and fenders where we are able to make the film virtually undetectable with minimal edges shown. This is important on light coloured vehicles where edges are prone to attracting dirt that can make an edge or seam more noticeable over time.
There are hundreds of PPF brands putting out products that don't deliver the quality we want to give to our customer base. We know how important it is that our customer gets excellence. And for that, we chose to work with the top clear bra company in the industry.
The XPEL film features the following:
There is a reason that XPEL PPF is the best on the market. It has been tested, and we trust it to keep your vehicle safe from scratches for years to come!
If you own a vehicle in Fort Myers, FL, and you are looking for a way to protect the vehicle's finish, contact Naples Auto Armour to learn more about paint protection film and all of our package options:
We are happy to discuss these options with you and provide you with as much information as you need to make a well-informed decision. Contact Naples Auto Armour at (239) 300-9985 in Fort Myers, FL, to get a free quote for paint protection film on your car.